Connecting & controlling Profoto flashes
- Start from the Zone Control Display by swiping from bottom to top.
- Then rotate dial to Brand and tap on it.
- Scroll through and select Profoto as the 1st choice and press .
- Then select the channel based on the least amount of RF Noise available, and press .
- Press Back/Home button to return to Zone Control Display so you can begin taking pictures.
*If you need to make a quick channel change, you can swipe from top to bottom of the screen, and tap . Here you can quickly scroll through to find the best channel for your shooting environment. Tap once you have made your selection. Then press the Back/Home button once to take you back to the Zone Control Display.
*When setting the channel for your Profoto lighting equipment, keep in mind that some units use channels 1-8, while others use 1-20. Click here to see a list of Profoto lighting equipment channel options
*Only 3 zones (A,B, and C) are available for use with TTL
*When using Profoto lighting equipment, you can only use Manual mode or TTL, and not both at the same time.
The Raven is compatible with most Profoto flashes. Click here to see the full list.
Brand and channel selection
- To set up the Raven to trigger Profoto flashes begin by swiping from bottom to top from the Zone Control Display
- Then turn the dial to Brand and tap on it
- On the left side of the screen scroll through to Profoto and press
- In this next screen you can select your channel using the RF Noise Detector. The more green the better!
- Once you have channel selected, press
- This brings you back to the Brand screen. Press the Back/Home button to return to the Zone Control Display to make your power level adjustments.
*If you need to make quick channel changes you can swipe from top to bottom of the screen, and tap . Here you can quickly scroll through to find the best channel for your shooting environment. Tap once you have made your selection. Then press the Back/Home button once to take you back to the Zone Control Display.
*Not all Profoto lighting equipment has the same number of channels available. To see a full list of channel options for Profoto lighting equipment click here.
Power level adjustments
- To change the power level adjustments, begin by making sure at least one zone is active, and the zone letter is highlighted.
- Then tap on this icon in the center of the screen .
- Now tap on
- This is where you will select the model of Profoto flash you will be using for the selected zone. Scroll through the list and tap to make your selection. This is so the Raven knows the minimum and maximum power output for each flash in the selected zone since Profoto has variety of flash models.
- Once you have selected the flash model for each zone you are using you are now ready to make power level adjustment. Start by selecting one or more zones with a quick tap on the screen or button for the zone. Once the zone, or zones, letter is highlighted with a white circle you can now make your power level adjustments by spinning the dial.
- Power levels change in .1 stops for each click as you turn the dial. After 10 seconds, the highlighted zone letter will end. This will lessen the chances of accidentally rotating the dial and change the power levels while holding the camera or while shooting images. To highlight the zone letter again, simply tap the screen or button.
Manual, PowerTracking, TTL, Multipop, Modeling Light
- To make changes to Manual, PowerTracking, TTL, Multipop, or Modeling Light, simply top on from the Zone Control Display. In this screen you can make any of these changes.
*The following Profoto Flashes are unable to do TTL with the Raven, B4 Air, D1 Air, D4 Air, Pro-8 Air